[an error occurred while processing this directive]

The Quickie UltraSuede Purse

Instructions are for Dollhouse size purse.

 Step 1

Cut a piece of Ultrasuede light approx 1-1/8 x 5/8", a small piece of chain around 1" and a finding of your choice.

Step 2

Using a pliers fold the finding in half but do not squeeze it all the way tight on its self.  Glue edge of the Ultrasuede.

Step 3

Fold the piece of Ultrasuede, gluing right sides together.  Let dry.  I use Grrip glue and it dries very fast.    Turn right sides out.

Step 4

Stuff a tiny bit of stuffing in the opening so it looks like there is something in the purse.

Step 5

I usually tuck the side glued edge in a bit so the purse has more shape.   Not necessary though.  Sometimes I tuck the bottom edge corners in to give the bottom more of a rounded shape.  Glue the purse opening closed.

Step 6

Glue the chain to the inside top edge on the finding.  I have found it easier to do it this way so that chain does not shift around.  Let dry.

Step 7

Gently squeeze the finding over the open end of the purse.  

Step 8

If you have more than a minute add some beads, pearls or like baubles to fancy it up a bit.

Thank you for visiting my site and hopefully you enjoyed my tutorial.

Just as a gentle reminder, that tutorial was written to help to stimulate your creativity. 

This Tutorial, Pictures, & Instructions are copy-righted & are not to be used as a tutorial of your own. 

This means you may not copy and post this tutorial to your own website, or print it out and sell or distribute it as your own.


[an error occurred while processing this directive]