The Quickie UltraSuede Purse

Instructions are for Dollhouse size purse.

Step 1


Cut a piece of Ultrasuede light approx 1-1/8 x 5/8", a small piece of chain around 1" and a finding of your choice.

Step 2


Using a pliers fold the finding in half but do not squeeze it all the way tight on its self. Glue edge of the Ultrasuede.

Step 3


Fold the piece of Ultrasuede, gluing right sides together. Let dry. I use Grrip glue and it dries very fast. Turn right sides out.

Step 4


Stuff a tiny bit of stuffing in the opening so it looks like there is something in the purse.

Step 5


I usually tuck the side glued edge in a bit so the purse has more shape. Not necessary though. Sometimes I tuck the bottom edge corners in to give the bottom more of a rounded shape. Glue the purse opening closed.

Step 6


Glue the chain to the inside top edge on the finding. I have found it easier to do it this way so that chain does not shift around. Let dry.

Step 7


Gently squeeze the finding over the open end of the purse.

Step 8


If you have more than a minute add some beads, pearls or like baubles to fancy it up a bit.